Bowflex Max Trainer M3 Service Manual page 122

21. Using a #2 Phillips screwdriver, remove the screws from the Right and Left Shrouds. ( 3 screws on the Right Shroud, 9 on the Left Shroud)
Remove the upper screws labeled ' * ' last.
*
22. Place pieces of cardboard between the Brake Magnets and the Disc Brake.
23. Using a #2 Phillips screwdriver, remove the 3 indicated screws from the
Disc Brake.
24. Carefully remove the Disc Brake from the machine exposing the lower Fan
Belt.
25. Turn the Fan Pulley while forcing the Fan Belt to the outside. Belt will come
off of the Fan Pulley.
Keep fingers out of any pinch opportunities when removing the
Fan Belt.
Right Side
Disc Brake
Brake Magnets
122
*
Left Side
Fan Pulley
Fan Belt