Bowflex Max Trainer M3 Service Manual page 113

5. Using a #2 Phillips screwdriver, remove the 3 indicated screw from
the Disc Brake.
6. Carefully remove the Disc Brake from the machine.
7. Place a piece of tape on the Brake Cable immediately above the
Cable Clamp. During re-assembly, the tape will be a guide for the
placement of the new Cable Clamp.
8. Using a #2 Phillips screwdriver, remove the 2 screws from the
Cable Clamp that connects the Potentiometer to the Cable.
Brake Cable
Cable Clamp
113