Bowflex Max Trainer M3 Service Manual page 124

29. Grasp the Fan Pulley where the Fan Belt is engaged on it, and forcibly
rotate the Fan Pulley until the Fan Belt is fully engaged.
Keep fingers out of any pinch opportunities when rotatng the
Fan Pulley.
30. Put on eye protection and cut the Zip-Tie without damaging the new
Fan Belt or Fan Pulley.
31. Installation is the reverse procedure.
32. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
124