Bowflex Max Trainer M3 Service Manual page 41

Note: The Bowflex Max Trainer
procedure is the same for the M5 model.
1. Unplug the AC Adapter from the machine and wait 5 minutes.
2. Using a #2 Phillips screwdriver, remove the 4 screws (2 on each side of
the Shroud) from the Console Assembly.
3. Carefully lift the Console Assembly and expose the Cable Connections.
Note: do not crimp any of the Console Cables.
4. Carefully disconnect the Cables noting their locations (see arrows).
Note: do not crimp any of the Console Cables.
5. Installation is the reverse procedure.
6. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
M3 is used in the following images. The
®
41
M5
only