Bowflex Max Trainer M3 Service Manual page 14

1. Unplug the power cord from the machine and wait 5 minutes.
2. Using two 6mm hex wrenches, remove the Wheel Assembly from the Pedal Arm. Place the components onto a disposable towel or rag. Be sure
not to get any oil onto your clothing.
In order to avoid possible serious injury when removing the Wheel Assembly, be careful to avoid fingers or hands being caught or
pinched.
Be aware that the Pedal Arms and the Upper Handlebars are connected and when either of these parts move the other does as well.
Wheel Assembly
Pedal Arm
Be sure to remove all of the components of the Wheel Assembly from the
Pedal Arm. (See image for all parts.).
Note: the Larger Washers may stick to the Wheel Bracket on the Pedal
Arm or to the Wheel.
Axle
14
Wheel Bearing
Larger Washer