Bowflex Max Trainer M3 Service Manual page 70

Note: The Bowflex Max Trainer
M3 is used in the following images. The
®
procedure is the same for the M5 model.
1. Unplug the AC Adapter from the machine and wait 5 minutes.
2. Using a #2 Phillips screwdriver, remove the indicated (by ovals) screws
and only loosen the lowest indicated screw (arrow) from the Right Fan
Cover.
3. The Right Fan Cover has a tab that needs to be pushed upward to clear
the loosened screw. While pushing up on the tab, remove the Right Fan
Cover from the assembly.
Note: the AC Power Cable is attached to the inside
of the Right Fan Cover. Be sure not to crimp the cable
by placing the Right Fan Cover close to the front of the
machine.
Tab
4. Using a #2 Phillips screwdriver, remove the indicated (by ovals) screws
and only loosen the lowest indicated screw (arrow) from the Left Fan
Cover.
5. The Left Fan Cover Assembly has a tab that needs to be pushed
upward to clear the loosened screw. While pushing up on the tab, remove
the Left Fan Cover Assembly.
70