Omron V600 Series User Manual page 44

Section 2
Installation and Wiring
■
Checking Installation
Check that the driver is correctly installed.
1.
Connect the ID Controller to the personal computer using the USB interface.
2.
On the Start Menu, select Control Panel - System.
3.
Click the Device Manager Button on the Hardware Tab Page.
4.
Select Ports (COM & LPT), and confirm that OMRON RFID USB COM is displayed.
The driver is correctly installed if this port is displayed.
Communications with the ID Controller can be performed with the COM number displayed in parentheses after OMRON RFID
USB COM.
RFID System
42
Operation Manual