Omron V600 Series User Manual page 115

Check/End specification
Subcommands
R/W Head No.
Terminator
Command code
C/E 1/2
P W *
2 1 1
Check/End specification
R/W Head No.
Subcommand Responses
Command code End code Terminator
0 0 *
P W
2 2
End code
CR
2
Specifies checking processing results or ending (terminating) the command.
C: Check processing
E: End
Specifies the Read/Write Head for querying or canceling.
1: Read/Write Head 1
2: Read/Write Head 2
CR
2
Indicates the results of command execution.
00: Normal end
74: A Data Carrier has not approached when the command to check results was executed.
75: A Data Carrier has not approached when polling auto processing was ended.
76: Communications with the Data Carrier were in process or processing was finished when poll-
ing auto processing was ended.
Refer to End Codes for more information.
p.135
Section 5
Communications
RFID System
113
Operation Manual