Section 2
Installation and Wiring
Windows XP (SP1)
1.
Turn ON the power to the personal computer and start Windows XP.
2.
Connect the ID Controller to the personal computer using the USB interface.
Refer to USB Port for more information.
Wait for the following window to be displayed.
3.
When the following window is displayed, select Install from a list or specific location (Advanced) and
click the Next Button.
4.
Click the Browse Button, select the folder in which the downloaded file V600-CA5D_100.inf is saved,
and then click the Next Button.
RFID System
40
Operation Manual
p.34