Sport Zones - Polar Electro Team2 Manual

When clicking the Connect button
in the Online Training tab, nothing
happens.

Sport Zones

Below you can find help to some common problems with sport zones and sport zone settings.
Problem
New sport zone cannot be added.
7) Transmitter is in non-secured
mode.
1) A team is not selected.
2) A training session is not selected.
Cause
Low value of lowest existing sport
Team2 SW help
base station.
5) Assign a player to the transmitter
in Team Properties (Options >
Team Properties > Players tab).
6) Change the transmitter's mode to
online in preferences according to
the instructions in software
preferences.
7) Change the transmitter's mode to
secured by inserting the transmitter
to the charger (power cable must be
plugged in), removing the
transmitter from charger and
inserting it back after a minimum of
3 seconds. Only one sound should
be heard.
1) Select a team (Options > Edit
Teams > Check a team > Close).
2) Select a training session or
training activity from the Training
session drop-down list at the top of
Online Training page.
If none of the above help, try to
close the Team 2 software and open
it again.
Solution
Modify the Low value of the lowest
existing sport zone so that it's larger
149