Table of Contents
Advertisement
Team2 SW Help
3. Type in the session name and select a training activity from the Training activity drop-
down list.
4. Check the Training with phases box.
5. Click the Add button in the Phases section.
6. Select a phase from the drop-down list. NOTE: Phases are created beforehand in Team
Properties.
7. Repeat steps 5 and 6 to add more phases to the session.
8. Repeat steps 2 to 7 to add more session with phases.
9. Close the window by clicking OK. Cancel by clicking Cancel.
Session With Phases Compared to Session Without Phases:
•
Start time is adjusted in the same way in both cases.
•
In case of session with phases, the Duration setting is different from the case of a
session without phases.
•
The duration of session with phases is set by changing the durations of the phases on
the right.
•
Duration is calculated automatically according to the durations of the phases.
•
End time is calculated automatically according to the duration and start time.
Online training
Online Training
Online Training opens by clicking the second page tab. Online training is tool for online
monitoring of players' heart rates. Heart rates can be viewed in a list, in a grid or as curves. Either
all or selected players' heart rates can be monitored at the same time. Heart rate, sport zone and
training load can be monitored simultaneously.
Elements
In the upper left corner it is shown if the base station is connected to the PC. Connection time is
also shown.
64
Advertisement
Table of Contents
