Table of Contents
Advertisement
Note that when you restore from a backup archive file, you will lose all the data in the current
2
Team
system. Therefore it is highly recommended that you
2
Team
system before restoring archived data.
1. Open the Team
2. Click File > Database Management. A popup window opens.
3. Go to the Restore tab.
4. Click Browse to select the directory where the backup archive file is located. See
compact and archive
5. Select the correct file and click the Restore button.
6. Wait while the software restores the data. This may take several minutes depending on
the file size.
7. Close the Database Management window by clicking Close.
After restoring the archived data, the Team2 system will only contain the data that was in the
archive file.
How to set automatic backups on
A backup file is a copy of all the data that has been recorded into the system up until the moment
the backup was taken. You can restore the data if your PC crashes or loses the data at some
point, so all the data will not be lost.
By turning on the automatic backups, you do not have to backup the data manually. See
make
backup.
To set automatic backups on:
1. Open the Team
2. Click File > Database Management. A popup window opens.
3. In the Backup tab, under Automatic backup, turn the automatic backups on by
selecting either:
•
Always, when closing the software, or
•
Always ask, when closing the software.
2
software.
database.
2
software.
Team2 SW help
make a backup file
of the current
How to
How to
81
Advertisement
Table of Contents
