Usb Dongle - Polar Electro Team2 Manual

USB dongle

Below you can find help to some common problems with the USB dongle.
Problem
2
Team does not recognise the USB
dongle.
Cause
1) The USB dongle is not plugged
into the computer.
2) The USB dongle is not added to
the system.
3) You have installed the USB
dongle drivers from the included
CD. Drivers provided with Cubix
USB dongle are not compatible with
Team 2 software. No driver
installation is needed. Just plug in
and start using with Team 2 .
Team2 SW help
numbers of each transmitter.
Solution
1) Make sure you have properly
plugged in the USB dongle to the
USB port on your computer.
2) Make sure you have properly
plugged in the USB dongle to the
USB port on your computer.
1. Open Team 2 software
2. Select Tools >
Preferences.
3. Select Base station /
USB dongle tab.
4. Click Add. A new dongle
appears to the USB
dongles list.
3) Uninstall the USB dongle drivers:
1. Select Start > (Settings)
> Control Panel.
2. Double-click Add or
Remove Program.
3. Select Bluetooth Stack
for Windows by Toshiba
from the list.
155