Table of Contents
Advertisement
•
Try to reboot your PC.
•
Update the drivers of the wireless connection adapter. Contact the adapter's
manufacturer's web site.
NOTE: If the wireless connection works between the PDA and the main base station but not
between the PC and the main base station, the problem is most likely in your PC settings.
Wireless connection between PDA and Base Station
•
Make sure you have the main base station switched on.
•
Make sure you have the correct wireless network key. If you have forgotten your wireless
network key, change it according to the instructions.
•
Make sure you have
•
Make sure you have the
•
Make sure you have the
•
If all the settings are set correctly, switch off the main base station and close the PDA
software (Menu > Quit). Then switch on the main base station and open the PDA
software again.
NOTE: If the wireless connection works between the PC and the main base station but not
between the PDA and the main base station, the problem is most likely in your PDA settings.
Online Training
Below you can find help to some common problems with online training.
Problem
Transmitter/Player's information
disappears from the list.
enabled PDA's wireless
correct wireless adapter
correct wireless network
Cause
1) Transmitter's memory is full.
2) Transmitter's battery is empty.
3) Strap's electrode areas are dry or
strap is secured incorrectly.
4) Connection between the PC/PDA
and the base station is momentarily
adapter.
settings.
settings.
Solution
1) Transfer training data from
transmitter to the PC.
2) Recharge transmitter's battery.
3) Wet the electrode areas of the
strap under running water. Make
sure that the strap is secured
correctly
and the wet electrode
Team2 SW help
147
Advertisement
Table of Contents
