Table of Contents
Advertisement
Team2 SW Help
4. Select the Base station/USB Dongle tab.
5. Select the main base station from the base station list. Note that if a secondary base
station is introduced to the system, the base station settings cannot be changed.
6. Type a base station name into the Name input box. The base station name is the name
of the base station's wireless network.
7. End by clicking Save.
To use secondary base stations
In order the secondary base stations work, the main base station must be on and connected to
the PC.
1.
Introduce secondary base stations to the
2. Turn on the main base station and connect it to the PC and the Team
3. Turn on the secondary base station(s).
4. Wait until the light (1) is lit on the secondary base station(s) and light (4) is lit on the main
base station. If the secondary base stations are introduced to the system, they connect to
the main base station wirelessly, automatically.
Facts
•
The base station is water-resistant so it can be used in the rain as long as the plug is in
place. Always use wireless connection and battery power in the rain!
•
Allows you to monitor up to 80 players in real time at the same time.
•
Built-in Wi-Fi (IEEE802.11b) so that wireless connection can be used between the
PC/PDA and the base station.
•
Built-in Bluetooth (100 m (330 ft) range).
•
RJ45 connector for Ethernet connection.
•
Secondary base stations connect to the main base station wirelessly.
•
Re-chargeable batteries with up to 12 hours stand alone use. Charging time 4 hours.
•
AC adapter included. There are four different plugs for the AC adapter included. Choose
the correct plug (according to the country) and place it into the adapter.
18
system.
2
software.
Advertisement
Table of Contents
