Glossary - Polar Electro Team2 Manual

Team2 SW Help
You cannot transfer training session
files from the transmitters' memory
by using the USB dongle.

Glossary

aerobic
anaerobic
bpm
continuous
hardware
HR
HRmax
HRR
intermittent
period
phase
156
1) The USB dongle is not plugged
into the computer.
2) The Team2 software does not
recognise the USB dongle.
3) The USB dongle has not been
introduced to the Team
Uses oxygen
Without oxygen
Beats per minute, heart rate
Training that is even and persistent. Has a low impact on
muscles and connective tissues.
Equipment, devices. In this case all the equipment that
included in Polar Team2 set.
Heart rate, beats per minute
Maximum heart rate
Heart rate reserve, the difference between resting and
maximum heart rate
Has a high impact on muscles and connective tissues
Part of a season, for example, pre-season or post-season,
usually has a certain goal
Part of a training session, usually a certain exercise
4.
5.
If Team2 software does not
recognise the USB dongle after the
you have uninstalled the drivers, try
to reboot your PC. You may also try
to plug the USb dongle into another
USB port on your PC.
1) 1) Make sure you have properly
plugged in the USB dongle to the
USB port on your computer.
2) See the instructions above
(Uninstall the USB dongle drivers).
2 software. 3) Introduce the USB dongle to the
Team2 software according to the
instructions.
Press Remove.
At some point Installation
remove ask for
confirmation "Are you
sure..." > Click Yes.