Polar Electro Team2 Manual page 142

Team2 SW Help
After you have set the wireless network settings, your PDA automatically detects the main base
station's network when the base station is on, and the wireless connection is ready for use.
NOTE: If the main base station is not on, or the PDA is out of network range, the preset wireless
network is displayed as unavailable in the wireless network list.
Finalize the Wireless Connection to the Base Station
1. Switch on the main base station if it is not already switched on. Wait approximately for
one minute until the base station is ready (the blue light 1 is lit).
2. Open the Team
136
2
PDA software (Start > Programs > Polar Team
2
PDA).