Polar Electro Team2 Manual page 51

Hide thumbs Also See for Team2:
Table of Contents

Advertisement

Before base station or USB dongle settings can be changed, the device must be connected to the
computer. The base station is connected to the system when lights 1 and 2 are lit and Team
software is running. Only main base station settings can be changed and it must be done before
the
secondary base stations are introduced to the
When the main base station is connected to the PC either with a Ethernet cable or wireless
connection, the wireless network key can be changed. Follow the instructions in the
setup wireless connection
base station settings.
The base stations that are introduced to the Team
Dongle tab. The type (main / secondary) is also displayed. If there are secondary base stations in
the system, the main base station settings (name and wireless network key) are disabled and
cannot be changed. The Remove button below the base station list clears the whole base station
list! The Add button below the base station list is used when
introduced to the
system.
USB dongle has to be introduced to the system during Wizard, or otherwise it will not work
properly. If you have not introduced the USB dongle during Wizard, see the
hardware
chapter. USB dongles that are in the system are listed in the USB Dongles list along
with status information. The status is either connected or disconnected.
To change name of the USB dongle select the USB dongle from the list and type the new
name into the Name input field.
To remove a USB dongle from the system select the USB dongle from the list and click
the Remove button.
Team Properties
To change Team Properties, a team must be selected. Team properties can be found from main
menu: Options > Team Properties. There are 5 tabs in Team Properties, Team, Sport Zones,
Training Activities, Tests and Players.
Team
Sport Zones
Training Activities
Tests
Players
topic. Wired Ethernet connection is recommended when changing the
system.
2
system are listed in the Base Station / USB
secondary base stations are
Team2 SW help
2
PC
How to
instructions in the
45

Advertisement

Table of Contents
loading

Table of Contents