Table of Contents
Advertisement
5. Click Remove button. The transmitter is removed without confirmation!
6. Repeat steps 4 and 5 if necessary.
See also
How to add
transmitters.
PDA software
Introduction to PDA Software
The PDA and Team
2
PDA software liberates you as a trainer to monitor players' heart rates
effortlessly during training. Team
Heart rates, sport zones and training loads can be monitored in a list or grid view. You can
monitor all the players or only a few players at a time. The PDA enables online monitoring with a
small-sized device without a PC!
It is easy to start up the Team
only a few steps away once the Team
1. Connect the PDA to PC according to the instructions provided with the PDA. To
synchronize information between your PC and the PDA, make sure you have all the
necessary software
2.
Install
the Team2 PDA software.
3. Sync your teams to the PDA via the Team
4. Connect the PDA to the Team
establish wireless
5. Monitor training online. See
NOTE: PDA device is not provided in Team
Team
2
PDA software is only available in English.
(*)
If you are using Windows XP, you need to have Microsoft ActiveSync installed, and if you are
using Windows Vista, you need to have Windows Mobile Device Center installed.
If you need general instructions on how to use PDA device, see the PDA device's manual.
PDA Requirements
2
The Team
PDA software requires that the PDA device fulfills the following minimum
requirements:
2
PDA software offers few essential Online Training features.
2
PDA software and it is easy to use. Mobile online monitoring is
2
PC software has been taken into use:
(*)
installed on your computer.
2
base station with a wireless connection. See
connection.
How to start online
2
set. Contact your local IT dealer to purchase one.
2
PC software.
monitoring.
Team2 SW help
How to
121
Advertisement
Table of Contents
