Table of Contents
Advertisement
Problem
In Options > Team Properties >
Players tab > Polar Training
Computer tab, the Transfer
buttons are disabled.
The transfer from the Polar training
computer to the PC or from the PC
to the Polar training computer fails.
Cause
There are unsaved changes in
Team Properties. Click Save before
transferring data between the PC
and the training computer.
1) Infrared adapter is not plugged in.
2) Infrared adapter drivers are not
installed.
3) Infrared adapter drivers are not
up-to-date.
4) Team
2
software does not
recognize the infrared adapter.
5) Polar training computer is not in
transfer mode.
6) Your Polar training computer
does not support infrared
communication.
Team2 SW help
Solution
Click Save before transferring data
between the PC and the training
computer.
1) Plug in the infrared adapter.
2) Install the infrared adapter drivers
according to the instructions
provided with the adapter.
3) Update the infrared adapter
drivers. Usually, you can find the
newest driver's from the
manufacturer's web site.
4) Close the Team
2
software, make
sure the infrared adapter is plugged
in properly and the drivers are
installed. Re-open the Team
software.
5) See the user manual of your
Polar product to get support in
setting the training computer into
transfer mode.
6) For example, the following Polar
training computers are compatible
with infrared communication:
RS800CX, RS800, RS400, CS600
and CS400. Please note that not all
of the mentioned training computers
are compatible with Team
2
transmitters.
2
151
Advertisement
Table of Contents
