Table of Contents
Advertisement
Team2 SW Help
Red led is blinking at HR.
Start recording sound,
one beep.
Green led is blinking
every 3 seconds.
Stop recording sound, two
beeps.
Red led is double blinking
every 5 seconds for 30
seconds.
Stop recording sound.
Red led is double-blinking
every 5 seconds for 10
minutes.
Stop recording sound.
Below is a description of lights and sounds during charging or when a transmitter is inserted into
the charger.
Light/Sound
Red led is on for 5
seconds.
Short sound.
6
Transmitter detects the HR signal and is ready for recording. Memory or battery level is
low.
Transmitter starts recording.
Transmitter is recording.
Transmitter stops recording.
Recording cannot be started because the battery or memory level is low.
Recording has been stopped because the transmitter memory is full or the battery is
empty.
Function
Transmitter is properly placed into the charger and is in secured mode.
Advertisement
Table of Contents
