Polar Electro Team2 Manual page 57

infrared communication and Team
S725X / S625X, S725, S720i / S710i and S610i.
When transferring data between the PC and the Polar training computer, set your Polar training
computer into connect mode, place it in front of the infrared port and select Transfer button from
the Team 2 software. See the user manual of your Polar product to get support in setting the
training computer into transfer mode.
There are two sections in the tab: Transfer to the PC and Transfer to the Polar Training
Computer.
NOTE: Data cannot be transferred if there are unsaved changes in Team Properties. Click Save
before transferring data between the PC and the training computer.
When transferring data to the PC, set your Polar training computer into connect mode, place it in
front of the infrared port and select Transfer button from the Team
transferring training files, the software displays a window where you can select which training
sessions you want to save to the system, to which player the training sessions are set and which
are the training activities after the transfer is done.
Transfer to the PC
Transfer to the PC has two settings that can be set on or off before transferring data.
•
When Training sessions (Files) is checked, training files are transferred from the
training computer to the PC.
•
When Person information (User settings) is checked, user information is transferred
from the training computer to the PC.
Transfer to the Polar Training Computer
Transfer to the training computer has five settings that can be set on or off before transferring
data.
•
When Date and time is checked, the date and time is transferred to the training
computer.
•
When Person information is checked, the selected player's information is transferred to
the training computer.
•
When Personal values is checked, the selected player's heart rate (and other) values
are transferred to the training computer.
2
transmitters: CS400, RS400, AXN500, AXN700, S810i,
Team2 SW help
2
software. If you were
51