Fiat Bravo Service Manual page 508

Bravo-Brava
Copyright Fiat Auto
ft
20v
Power steering pump
Removi ng - ref itti ng
Before removing the power steering pump,
drain the fluid from the reservoir.
NOTE
The old fluid should
Top up the level with fresh fluid.
To remove the power steering pump, proceed
as follows:
- disconnect the fluid inlet pipe from the
power steering pump;
after slackening and removing the belts in
accordance with the procedure described
in Sec. 10, undo the bolt and remove the
pulley from the power steering pump;
- unscrew the delivery pipe connector (ar-
rowed), then withdraw the pump w i t h the
hose.
NOTE To refit the power steering pump,
verse the procedure
then refit and tension
described in Sec. 10.
S t e e r i n g
4 1 .
not be reused.
re-
for removal,
the belts as
25