Fiat Bravo Service Manual page 286

Gearbox and differential
Removing - refitting
2 1 - 2 7 .
4
Bravo-Brava I
1. Disconnect the drive shaft, gearbox side,
from the differential, levering on the en-
gagement point, and move it away from
the working area.
2. Disconnect the Lambda probe wiring
connector.
3. Undo the nuts securing the first section of
the exhaust pipe to the manifold.
4. Undo the rear attachments and remove
the first section of the exhaust pipe from
the car.
5. Disconnect the drive shaft, intermediate
shaft side, from the differential, levering
on the engagement point.
Publication no. 506.670