Gearbox and differential
Remote control assembly
2 1 - 2 7 .
32
Bravo-Brava
1. Disconnect the Lambda probe electrical
connection and disconnect the first sec-
tion of the exhaust pipe from the front
mountings.
2. Release the exhaust pipe from the rubber
mount indicated.
3. Undo the bolts securing the exhaust pipe
front mounting.
4. Undo the bolts securing the exhaust pipe
rear mounting, then withdraw it from the
car.
5. Remove the heat shield by undoing the
bolts illustrated.
A i
16v
Publication
no.
506.670