S t e e r i n g
Power steering pump
4 1 .
22
Bravo-Brava
Removing-refitting
Before removing the power steering pump,
drain the fluid from the reservoir.
NOTE
The old fluid should not be reused.
Top up the level with fresh fluid.
To remove the power steering pump, proceed
as follows:
1. undo the pump pulley bolts;
Place the vehicle on ramps, remove the front
right wheel, then:
2. undo the bolts, release the button and re-
move the right wheelarch cover;
3. slacken the belt tensioner and remove the
belt;
4. undo the bolts and remove the pulley.
ft
16v
Publication
no.
506.670