Fiat Bravo Service Manual page 499

S t e e r i n g
Power-assisted steering gear
4 1 .
Dismantling-refitting
1. slacken the nut locking the tie-rod then un-
screw the tie-rod until you can remove it;
NOTE Check that there is no stiffness or ex-
cessive play on the balljoints.
16
- withdraw the power steering gear
from underneath the vehicle.
NOTE To refit the power
gear, reverse the procedure
for removal.
Check the front wheel toe-in
A
whenever the steering gear is
removed-refitted.
Power assisted
steering gear
2. undo the clamps on the dust gaiter and lu-
bricating seal, and remove the gaiter.
NOTE Thoroughly
holes or tears, and if necessary re-
place it.
Before fitting the last gaiter
A
side), insert the specified quantity of
grease.
Btavo-Brava
steering
rack-and-pinion
mm
check the gaiter for
(pinion
Publication no. 506.670
< 1