Fiat Bravo Service Manual page 306

Gearbox and differential
Removing - refitting
2 1 - 2 7 .
24
Bravo-Brava
Fit the engine support stand 1860851000 and
the adaptor 1860851001 in the appropriate
mountings.
Front mounting: insert the tool in the seat of
the bonnet catch so that it rests on the front
crossframe.
Rear mounting: fit the tool level with the cen-
tral reinforcement of the fire-proof bulkhead.
Secure the hook of the stand to the eyelet pre-
viously positioned near the thermostat.
2. Relieve the staking and then remove the hub
nut (gearbox side and timing side).
ft
16v
Publication no. 506.670