Bravo-Brava
A
The power-assisted steering system is self-bleeding; it is bled by turning the steering wheel full
lock to the right and left with the engine running and the car stopped.
This procedure should be carried out whenever the connecting pipes are removed and refitted.
NOTE
If the steering becomes hard, this may be due to slipping of the pump pulley belt, or to a low flu-
id level.
If there is a fault in the pump, actuating cylinder or distributor valve, the power steering will
function as an ordinary mechanical steering gear.
On both versions with mechanical steering gear and versions with power-assisted steering, the front
wheel toe-in is adjusted by slackening the nut locking the tie-rod and screwing or unscrewing the
tie-rod until the specified toe-in value is obtained, without changing the positions of the steering wheel
spokes.
Copyright
Fiat
Auto
FRONT WHEEL TOE-IN
S t e e r i n g
Power-assisted steering
4 1 .
11