Gearbox and differential
Removing-refitting
2 1 - 2 7 .
56
Bravo-Brava
1. Undo the bolts securing the intermediate
shaft to the engine, release it from the
gearbox and move it away from the work-
ing area, securing it in an appropriate
manner.
2. Remove the starter motor by undoing its
bolts.
3. Remove the bottom bolts securing the
gearbox to the power unit.
4. Undo the bolt shown in the figure from
the bellhousing, to permit installation of
the gearbox support tool.
5. Place
the
gearbox
1860873000 on a hydraulic jack, then se-
cure it to the gearbox as shown in the fig-
ure.
b
20v
support
tool
Publication
no.
506.670