Fiat Bravo Service Manual page 267

Bravo-Brava
P4A55BJ02
1. Disconnect the electrical connector, then undo the Lambda sensor and remove it from its housing.
2. Disconnect the electrical connector, undo the bolt fixing the detonation sensor and remove it.
3. Disconnect the electrical connector and undo the casing for the vehicle speed sensor, removing it
from its housing.
Copyright by Fiat Auto
ft*»
Removing-refitting:
1. Lambda sensor
2. Detonation sensor
3. Vehicle speed sensor
P4AS5BJ01
P4ASSBJ03
Removing-refitting coolant temperature
sensor
- Disconnect the electrical connector from
the sensor;
- undo the sensor removing it from its hous-
ing.
A
P4A5SBJ05
Fuel system
Take great care that the sensor is cor-
rectly refitted and over the electrical
connection, since the
sent by the sensor is also used by the
control unit for operating the radiator
fan.
E n g i n e
10.
P4A55BJ04
information
5 5