Fiat Bravo Service Manual page 426

Bravo-Brava
Copyright Fiat Auto
B r a k i n g s y s t e m
Hydraulic system
remove the attachment buttons (1) and (2)
on the sound-proofing panel;
NOTE The button (1) cannot be reused, so
during assembly, after fitting the
plate (3), a new button should be
fitted.
The sound-proofing
A
be fully removed; it is sufficient
move it over to the right to permit ac-
cess to the servo unit's
nuts.
withdraw the split pin to release the servo
unit pushrod from the pin located on the
pedal;
- undo the servo unit nuts (arrowed) from
the pedal assembly mounting;
33.
panel need not
to
attachment
'
1