Fiat Bravo Service Manual page 255

Hide thumbs Also See for Bravo:

Table of Contents

PROCEDURE FOR DISMANTLING THE

RAPID ATTACHMENT PIPE FOR THE AN-

TI-EVAPORATION SYSTEM FROM THE

INLET MANIFOLD

The pipe for the anti-evaporation system (1)

is held in place on the inlet manifold cartridge

(2) by the small clamp (3). A flexible washer

(4) keeps the cartridge (2) in its housing pre-

venting any fuel vapours from escaping by

means of an O ring (5).

1. Anti-evaporation system rapid attachment

2. Cartridge

3. Pipe retaining clamp

4. Flexible washer

In order to extract the pipe (1), push the

clamp (3 with your fingers towards the man-

ifold and, at the same time, extract the actual

pipe. The operation can also be carried out

with the help of an 11 mm spanner to facili-

tate the movement of the clamp (3) towards

the manifold.

Do not use tools to extract the pipe

which could damage the system.

II-97 - Update

Chapters

Table of Contents