Fiat Bravo Service Manual page 347

Bravo-Brava
Copyright Fiat Auto
ft ° Gearbox and differential
Removing-refitting
1. Remove the bottom flywheel guard from
the bellhousing.
2. Undo the bolt shown in the figure on the
bellhousing, to enable the gearbox sup-
port tool to be installed.
3. Remove the power unit central mounting
to enable the gearbox support tool to be
subsequently installed.
4-5. Place the gearbox
1860873000 on the hydraulic jack, then
secure it to the gearbox at the points
shown in the figure (front view and rear
view).
2 1 - 2 7 .
support tool
6 5