Fiat Bravo Service Manual page 390

Bravo
R E M O V I N G - R E F I T T I N G F U E L M A N I F O L D C O M P L E T E WITH I N J E C T O R S AND P R E S -
S U R E R E G U L A T O R
Proceed as follows:
- Disconnect the fuel supply pipe (5) from the
union.
- Loosen the band for the return pipe and dis-
connect the flexible rubber pipe from the rigid
pipe.
- Disconnect the electrical connectors from the
injectors.
- Undo the fixing bolts (7).
- Extract the injector manifold assembly..
- To remove the injectors from the fuel mani-
fold, remove the clip (9).
Copyright by Fiat Auto
ft
1. Fuel manifold
2. Fuel pressure regulator
3. Injectors
4. Vacuum pick up from engine inlet manifold
5. Fuel supply pipe from the electric pump
6. Fuel return pipe to the tank
7. Bolts fixing fuel manifold and injectors
8. Pressure regulator clip on fuel manifold
9. Injector clip on fuel manifold
E n g i n e
Fuel system
10.
P 4 A 3 9 F J O
2
3 9