Fiat Bravo Service Manual page 495

S t e e r i n g
Power steering gear
4 1 .
12
RACK-AND-PIIMION POWER STEERING
GEAR
Removing - refitting
Before removing the power steering gear,
drain the fluid from the reservoir.
NOTE
The old fluid should
Top up the level with fresh fluid.
To remove the rack-and-pinion power steer-
ing gear, proceed as follows:
- remove the bolt securing the shaft to the
power steering pinion.
Raise the vehicle, remove the front wheels,
then working on both sides:
- undo the nuts securing the right and left
tie-rods to the vertical links;
- using tool 1847035000
tie-rod end heads from t h e t w o vertical
links;
Bravo-Brava
not be reused.
prise off the
Publication no. 506.670