Fiat Bravo Service Manual page 279

C l u t c h
Clutch operation
1 8 .
10
1. Release the pipe connecting the operating
cylinder to the retaining bands.
2. Disconnect the pipe for the hydraulic sys-
tem from the clutch pump.
3. Remove the clip fixing the clutch pump to
the pedal.
4. Undo the nuts fixing the clutch pump to
the bodyshell.
5. Disconnect the brake fluid supply union
from the clutch pump, then remove it.
IX-95 - Cancels and replaces
Before disconnecting the pipe it is ne-
cessary to drain the hydraulic
Print no.
Bravo
system.
506.670/03