Arp Entry Management - NETGEAR GS752TP Software Administration Manual

ARP Entry Management

Use this screen to remove entries from the ARP Table.
To remove entries from the ARP table:

1. Select Routing
The following screen displays:
2. In the Remove From Table field, select the ARP entries to remove.
The following are ARP entries then can be removed:
• All Dynamic Entries. Remove the dynamic entries from the ARP table.
• All Static Entries. Remove the dynamic entries from the ARP table.
• All Entries. Remove all static and dynamic entries from the ARP table.
• Specific Entry. Remove a specific ARP entry from the ARP table. If you select
Specific Entry in the Remove from Table list, you can enter the IP address of an entry
to remove from the ARP table.
• None. Select if you do not want to delete any entry from the ARP Table.
3. Click APPLY to send the updated configuration to the switch.
Configuration changes take place immediately.
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
ARP > Advanced

Configuring Routing
ARP Entry Management.

137