263 - NETGEAR GS752TP Software Administration Manual

Also the confirmed action on this flow is to send the packets with a committed rate of
10,000 Kbps and burst size of 128 KB. Packets that violate the committed rate and burst size
are dropped.
802.1x
Local area networks (LANs) are often deployed in environments that permit unauthorized
devices to be physically attached to the LAN infrastructure, or permit unauthorized users to
attempt to access the LAN through equipment already attached. In such environments, it
might be desirable to restrict access to the services offered by the LAN to those users and
devices that are permitted to use those services.
Port-based network access control makes use of the physical characteristics of LAN
infrastructures in order to provide a means of authenticating and authorizing devices
attached to a LAN port that has point-to-point connection characteristics and of preventing
access to that port in cases in which the authentication and authorization process fails. In this
context, a port is a single point of attachment to the LAN, such as ports of MAC bridges and
associations between stations or access points in IEEE 802.11 wireless LANs.
The IEEE 802.11 standard describes an architectural framework within which authentication
and consequent actions take place. It also establishes the requirements for a protocol
between the authenticator (the system that passes an authentication request to the
authentication server) and the supplicant (the system that requests authentication), as well
as between the authenticator and the authentication server.
The switch supports a guest VLAN, which allows unauthenticated users to have limited
access to the network resources.
Note: You can use QoS features to provide rate limiting on the guest VLAN
to limit the network resources the guest VLAN provides.
Another 802.1x feature is the ability to configure a port to enable or disable EAPoL packet
forwarding support. You can disable or enable the forwarding of EAPoL when 802.1x is
disabled on the device.
The ports of an 802.1x authenticator switch provide the means to offer services to other
systems reachable through the LAN. Port-based network access control allows the operation
of a switch's ports to be controlled in order to ensure that access to its services is permitted
only by systems that are authorized to do so.
Port access control provides a means of preventing unauthorized access by supplicants to
the services offered by a system. Control over the access to a switch and the LAN to which it
is connected can be desirable in order to restrict access to publicly accessible bridge ports or
to restrict access to departmental LANs.
Access control is achieved by enforcing authentication of supplicants that are attached to a
controlled ports of the authenticator. The result of the authentication process determines
whether the supplicant is authorized to access services on that controlled port.
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Configuration Examples

263