NETGEAR GS752TP Software Administration Manual page 168

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
4. From the list in the 2 column, select the authentication method, if any, that must appear
second in the selected authentication login list.
Use this method if the first method times out.
If you select a method that does not time out as the second method, the third method is
not tried. This parameter does not appear when you first create a login list.
5. From the list in the 3 column, select the authentication method, if any, that must appear third
in the selected authentication login list.
This parameter does not appear when you first create a login list.
6. Click APPLY to update the switch with the HTTP Authentication settings.
HTTPS Authentication List
Use the HTTPS Authentication List to configure the default HTTPS login list.
To change the HTTPS authentication method for the default list:

1. Select Security
List.
The following screen displays:
2. Select the check box next to the List name.
3. From the list in the 1 column, select the HTTPS authentication method that must appear first
in the selected authentication login list.
If you select a method that does not time out as the first method, such as local, no other
method is attempted, even if you have specified more than one method. This parameter
does not appear when you first create a login list. User authentication occurs in the order
the methods are selected. Possible methods are as follows:
Management Security

Managing Device Security
Authentication List > HTTPS Authentication

168