Global Arp Configuration - NETGEAR GS752TP Software Administration Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Global ARP Configuration

Use the Global ARP Configuration screen to display and change the configuration
parameters of the ARP table.
To configure the global ARP settings:

1. Select Routing
The following screen displays:
2. In the Age Time (secs) field, enter the value you want the switch to use for the ARP entry
ageout time.
You must enter an integer value, which represents the number of seconds it takes for an
ARP entry to age out. The valid range is 15 – 21,600 seconds. The default value is 1200
seconds.
3. Click APPLY to send the updated configuration to the switch.
Configuration changes take place immediately.
ARP > Advanced
 
Configuring Routing
Global ARP Configuration.
136