NETGEAR GS752TP Software Administration Manual page 213

Gigabit smart switches
Hide thumbs Also See for GS752TP:
Table of Contents

Advertisement

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
STP Mode. The Spanning Tree Protocol (STP) administrative mode for the port or
LAG. The possible values for this field are:
Enable. Spanning Tree Protocol is enabled for this port.
Disable. Spanning Tree Protocol is disabled for this port.
STP State. The port current state spanning tree state. This state controls what action
a port takes on receipt of a frame. If the bridge detects a malfunctioning port, it places
that port into the broken state. The other five states are defined in IEEE 802.1D:
Disabled
Blocking
Listening
Learning
Forwarding
Broken
Admin Mode. The port control administration state:
Enable. The port can participate in the network (default).
Disable. The port is administratively down and does not participate in the
network.
LACP Mode. The Link Aggregation Control Protocol administration state:
Enable. The port is allowed to participate in a port channel (LAG), which is the
default mode.
Disable. The port cannot participate in a port channel (LAG).
Physical Mode. The port speed and duplex mode. In autonegotiation mode, the
duplex mode and speed are set from the autonegotiation process.
Physical Status. The port speed and duplex mode status.
Link Status. Indicates whether the port link is up or down.
Link Trap. Determines whether to send a trap when link status changes. The factory
default is Enable.
Enable. The system sends a trap when the link status changes.
Disable. The system does not send a trap when the link status changes.
Octets Received. The total number of octets of data (including those in bad packets)
received on the network (excluding framing bits, but including FCS octets). This
object can be used as a reasonable estimate of ethernet utilization.
Packets Received 64 Octets. The total number of packets (including bad packets)
received that were 64 octets in length (excluding framing bits but including FCS
octets).
Packets Received 65-127 Octets. The total number of packets (including bad
packets) received that were 65 through 127 octets in length inclusive (excluding
framing bits but including FCS octets).
Monitoring the System
213

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs728tpGs728tpp

Table of Contents