NETGEAR GS752TP Software Administration Manual page 151

The following screen displays:
2. Enter the new class name.
3. Select the class type, and click Add.
The switch supports only the Class Type value All, which means all the various match
criteria defined for the class must be satisfied for a packet match. All signifies the logical
AND of all the match criteria.
4. Click APPLY to save the class. Configuration changes take effect immediately.
5. To configure this class, proceed to
To configure the class match criteria:

1. In the IPv6 Class Configuration screen, select the name of the class.
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
To configure an IPv6 class:
Configure Quality of Service
151
on page 150.