Remove An Arp Entry From The Arp Cache - NETGEAR ProSafe XS728T User Manual

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual

Remove an ARP Entry From the ARP Cache

You can remove all or specific entries from the ARP table.

To remove entries from the ARP table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing> ARP > Advanced > ARP Entry Management.
6. From the Remove From Table menu, select the type of ARP entry to be deleted:
• All Dynamic Entries
• All Static Entries
• All Entries
• Specific Entry. Lets you specify the IP address to be removed.
7. If you select Specific Entry, in the Remove IP Address field, enter the IP address to be
removed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Change the Default IP Address of the
Configure Routing
178