Appendix A Hardware Specifications And Default Values - NETGEAR GS752TP Software Administration Manual

Hardware Specifications and
A.
Default Values
The GS752TP, GS728TP, and GS728TPP switches conform to the TCP/IP, UDP, HTTP,
ICMP, TFTP, DHCP, IEEE 802.1D, IEEE 802.1 p, and IEEE 802.1Q standards.
They also conform to the IEEE802.3i (10BASE-T), IEEE802.3ii (100Base-TX), IEEE802.3ab
(1000Base-T), IEEE802.3af (DTE Power via MDI), IEEE802.3at (DTE Power via MDI
Enhancements), and IEEE802.3az (EEE) standards.
Feature
Interfaces
Flash memory size
SDRAM size and type
Feature
Switching capacity
Forwarding method
Packet forwarding rate
Value
24 or 48 10/100/1000 Mbps switching ports
.
GS752TP The first eight ports are PoE+ (Power over Ethernet)
providing 30W of DC power, and the remaining ports are PoE providing
15.4W of DC power.
.
GS728TPGS728TP The first eight ports are PoE+ providing 30W of
DC power, and the remaining ports are PoE providing 15.4W of DC
power.
.
GS728TPP All 24 ports are PoE+ providing 30W of DC power. This
model includes an external power supply to support the increased
power requirements.
Four 100/1000M SFP ports (port 25–29 or 49–52) to support optical
module
32 MB
128 MB DDR2
Value
Non blocking full wire speed on all packet sizes
Store and forward
:
10M 14,880 pps
:
100M 148,810 pps
:
1G 1,488,000 pps
248
A