Ip Rules - NETGEAR GS752TP Software Administration Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

IP Rules

Use the IP Rules screen to define rules for IP-based standard ACLs. The access list
definition includes rules that specify whether traffic matching the criteria is forwarded
normally or discarded.
Note: There is an implicit "deny all" rule at the end of an ACL list. This rule
means that if an ACL is applied to a packet and if none of the explicit
rules match, the final implicit "deny all" rule applies and the packet is
dropped.
To configure IP rules, select the following:

1. Select Security
In the following screen, an IP rule exists, and one rule has been configured.
2. From the ACL ID field, select the IP ACL for which to create or update a rule.
The valid range is 1–99.
3. Configure the following fields:
• Rule ID. Specify a number from 1 to 10 to identify the IP ACL rule. You can create up
to ten rules for each ACL.
• Action. Select an ACL forwarding action:
• Permit. Forwards packets which meet the ACL criteria.
• Deny. Drops packets which meet the ACL criteria.
ACL > Advanced IP Rules.
 
Managing Device Security
198