NETGEAR GS752TP Software Administration Manual page 83

The following screen displays:
2. To add a VLAN, configure the VLAN ID, name, and type, and click ADD.
You have the following options:
• VLAN ID. Specify the VLAN identifier for the new VLAN. You can enter data in this
field only when you are creating a VLAN. The range of the VLAN ID is 2–4093.
• VLAN Name. Use this optional field to specify a name for the VLAN. It can be up to
32 alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 is
always named Default.
• VLAN Type. This field identifies the type of the VLAN you are configuring. You
cannot change the type of the default VLAN (VLAN ID = 1) because the type is
always Default. When you create a VLAN on this screen, its type is Static. Voice
VLAN (2) and Auto-Video VLAN (3) are created by default.
3. To modify settings for a VLAN, select the check box next to the VLAN ID, change the
desired information, and click APPLY.
Configuration changes take effect immediately.
To reset VLAN settings on the switch to the factory defaults:

1. Select the Reset Configuration check box
2. Click OK in the pop-up message to confirm the operation.
If the Management VLAN is set to a non-default VLAN (VLAN 1), it is automatically set to 1
after you reset the VLAN configuration.
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Configuring Switching Information
83