NETGEAR GS752TP Software Administration Manual page 30

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. In the Global Configuration Section, configure the following:
• Admin Mode. Enable or disable the IPv6 network interface on the switch. The default
value is Enable.
• IPv6 Address Auto Configuration Mode. The IPv6 address for the IPv6 network
interface is automatically configured if this option is enabled. The default value is
Disable.
• IPv6 Gateway. Specify the gateway for the IPv6 network interface. The gateway
address is in IPv6 global or link-local address format.
3. Click APPLY to apply the changes to the system.
To modify IPv6 addresses on the network interface:

1. Select System
2. in the IPv6 Network Interface Configuration section, configure the following:
• IPv6 Prefix/Prefix Length. Select an existing IPv6 prefix and prefix length from the
list, or add a new IPv6 prefix and prefix length to the list of IPv6 addresses. The
address is in the global address format.
• EUI64. Specify whether the IPv6 address is in EUI-64 format. The default value is
False.
3. Click ADD to add a new IPv6 address, or click DELETE to delete a selected IPv6
address from the list of IPv6 addresses.
4. Click APPLY to apply the changes to the system.
Management IPv6 Network Configuration.
 
Configuring System Information
30