NETGEAR GS752TP Software Administration Manual page 116

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. Next to MLD Snooping admin mode, enable or disable the administrative mode for MLD
Snooping for the switch.
The default is disabled.
The VLAN IDs Enabled For MLD Snooping section displays VLAN IDs enabled for MLD
snooping.
3. Click APPLY to send the updated configuration to the switch.
Configuration changes take place immediately.
MLD VLAN Configuration
MLD snooping can be enabled on a per-VLAN basis. It is necessary to keep track of the
interfaces that are participating in a VLAN in order to apply or remove configurations.
To configure the MLD VLAN:

1. Select Switching Multicast MLD Snooping
 
Configuring Switching Information
116
MLD VLAN Configuration.
