NETGEAR GS752TP Software Administration Manual page 45

The PoE Configuration screen displays the fields described below:
Table 8. PoE Configuration Information
Field
Power Status
Nominal Power
Threshold Power
Consumed Power
To configure PoE traps:

1. Select System > PoE > Basic > PoE Configuration.
The following screen displays:
2. Select the appropriate radio button to enable or disable traps.
Click APPLY to apply the new setting to the system.
Note: You can also access the PoE Configuration screen by selecting System
PoE Advanced

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Description
Indicates whether the PoE capability is on or off.
Indicates the maximum amount of power the switch can provide to all ports.
Indicates a power threshold percentage. In order to give power to an
additional port, the consumed power must be below the threshold.
Displays the amount of power the system can consume before the system
does not provide power to an additional port.
PoE Configuration.

Configuring System Information
45
